PL-Series, Pow’R-LOCK™ Self-Locking Portable Lift System
A portable lifting solution that offers continuous load locking technology for heavy lifting applications
- Provides continuous locking protection during lift, lower and hold functions
- Patent-pending control technology synchronizes cylinder and lock nut for smooth and efficient lifting and lowering
- Unique double-acting cylinder offers a low collapsed height to accomodate more lifting applications
- Simple 2-button pendant allows operation of raise and lower functions from up to 20 feet away
- All exposed load-bearing steel cylinder components utilize a nitrocarburizing treatment to reduce wear and resist corrosion
- Ergonomic handle has six positions for comfortable handling and folds when not in use
- Meets ANSI B30.1-2009, AS/NZS‑2538, AS/NZS‑2693 certification criteria
GBJ Series, Industrial Bottle Jacks
- Lower handle effort reduces operator fatigue
- Fully serviceable
- High-strength beam and pump linkage for long life
- Pumping handle included on all models
- Safety relief valve to prevent overload
- Automatic by-pass port to prevent over-extension
- Wiper seal for extended life
- Thick base material with large area for increased strength and stability during lifting
RC, P, V-Series, Extreme Environment Products
Maximum Corrosion Resistance
- Enerpac extreme environment cylinders, pumps, and valves are designed to withstand the harshest conditions
- Corrosion resistant, nickel-plated valves and cylinders
- Stainless steel pump inserts will not corrode
- Viton® Seals provide heat and chemical resistance
- Anodized aluminum pump reservoirs and plastic encapsulated pump bodies resist wet environments
- Two-speed operation reduces pump handle strokes 78% compared to single-speed pumps
- Pump handles lock for easy carrying
BLS-Series, Hydraulic Stage-Lift Cylinders
- Enerpac hydraulic stage lift cylinders allows for a load to be lifted many times the stroke of the cylinder and total height is only limited by the strength and stability of the cribbing system
- Double-acting hydraulic cylinder with solid plunger design
- Simple three-stage operation
- Swivel saddle and large support attachments for stability
- Anti-rotation device
- Built-in overload protection.
- Option: stroke sensors for use with Enerpac synchronous lifting systems
- Capacity per lifting point 50 - 200 ton
JH, JHA-Series, Aluminium and Steel Jacks
- Enerpac aluminum and steel lifting jacks have a capacity of 7 to 150 tons
- All-directional operation on 7, 15 and 35 ton JHA-series
- Internal relief valve to prevent overloading
- Machined flat front and bottom surfaces permit flush alignment in tight corners
- Chrome plated plungers
- Pumping handle included
- Automatic by-pass port to prevent over-extension (JH-series)
PR-Series, POW'R-RISER Lifting Jack
- Enerpac Pow'r-Riser lifting jacks are available in 534, 890, 1334 and 1779 kN capacities with pneumatic or electric pumps for the toughest jobs
- 102 mm ground clearance for transport over rail and rough terrain
- Three position handle provides easy tilt back and transport
- Complies with ASME/ANSI B30.1 specifications
- Easy to change external filter minimizes down time
- Rugged, fully enclosed 610 mm wide frame with no exposed fittings or hoses
- SUP-R-STACK™ Extension System allows lifting at all heights without blocking
LW-Series, Hydraulic Vertical Lifting Wedge
- Hydraulic vertical lifting wedge has lifting force of 16 tons at 700 bar hydraulic pressure
- Requires very small access gap of only 10 mm
- Each step can spread under full load
- Straight vertical lifting
- Unique interlocking wedge design: no first step bending and risk of slipping out
- Single-acting, spring return cylinder
- Lifting wedge LW-16 includes safety block SB-2
- Includes RC-Series Cylinder with CR-400 coupler
SOH-Series, Hydraulic Machine Lifts
- Enerpac hydraulic machine lifts are designed for lifting heavy equipment with minimum available access
- Remote hydraulic pump enhances safety
- Low height lifting toe
- Precision guided to reduce friction and isolate cylinder from side-loads
- Two extendable support feet provide extra stability
- Includes RC-Series Cylinder with CR-400 coupler