Assured protection at the highest level

Maximum defence against Type 1 hazards. Outstanding resistance to attack from liquids, gases and solid particulates. Dependable, durable and designed for day-long working comfort in dangerous atmospheres. Made by a world leader to SOLAS and EN standards.

  • One suit, many tasks “ from emergencies and biohazards to routine maintenance
  • One suit, many users “ thanks to rapid glove and boot change systems
  • One suit, many industries “ Fire & Rescue, Food Processing, Law Enforcement, Shipping
  • Positive pressure ventilation systems keep crew safe and cool
  • Anti-static material ensures safety in explosive atmospheres
  • Flexible material for maximum strength and durability plus wearer comfort
  • Simple 4-step pressure test kit simplifies compliance with European or USA standards

 

  ALPHATEC® LIGHT
TypeRear-entry, non-encapsulating design, type TR (with face seal and without hump, BA worn outside the suit).
MaterialStrong and flexible polyester fabric coated on each side with PVC. This construction provides a soft and durable material with good resistance to a wide range of industrial chemicals. Double welded seams. Available in XXS “ XXXL.
Face SealAnatomically designed rubber face seal. Alternatively, the suit can be fitted with a full-face mask which is glued to the hood. A Mini hood comes with the suit.
Gloves& AttachmentsNeoprene rubber gloves in combination with rubber cuffs for added safety. Gloves are attached with a bayonet ring system for fast and easy exchange.
Footwear& AttachmentsSewn-in socks/booties made of suit material. Alternatively attached PVC safety boots approved according to EN 20345. Boots are fixed with a ring attachment for simplified boot exchange.
ZipRear-entry gas-tight horizontal PVC zip across the shoulders. Zip is protected by a splash guard with hookand- loop closure.
VentilationAlphaTec® exhaust valve on suit chest ventilates excess air inside the suit.
  ALPHATEC® LIGHT
TypeRear-entry, non-encapsulating design, type TR (with face seal and without hump, BA worn outside the suit).
MaterialButyl rubber with top layer of Viton® rubber coated on polyamide fabric Inner: Butyl rubber.
SeamsStitched and sealed with glued rubber tape.
Gloves& AttachmentsViton®/Butyl rubber gloves in combination with rubber cuffs. Gloves are attached with a bayonet ring system for fast and easy exchange.
Footwear& AttachmentsSewn-in socks/booties made of suit material. Alternatively attached black nitrile rubber safety boots with European approval as Firemen's boots. Boots are fixed with a ring attachment for simplified boot exchange.
VentilationStandard ventilation system provides constant overpressure inside the suit. 4-rate regulating valve (0, 2, 30 and 100 l/min).

 

 

APPROVALS & ACCREDITATIONS

EN 943-1:2015 + A1:2019

EN 943-2:2019

EN 1073-2:2002 (radioactive particle protection)

EN 14126:2003 (infective agent protection)

EN 1149-5:2008 (antistatic suit material)

Approved for use in ATEX zones 0, 1, 2/20, 21, 22 and chemical group IIA, IIB, IIC

SOLAS

{{ datasheet.displayFileName }}

Download PDF

{{ donningInstruction.displayFileName }}

Download PDF

{{ approvalCertificate.displayFileName }}

Download PDF

{{ msd.displayFileName }}

Download PDF

{{ brochure.displayFileName }}

Download PDF

{{ ecDeclaration.displayFileName }}

Download PDF

{{ manual.displayFileName }}

Download PDF

{{ leaflet.displayFileName }}

Download PDF

{{ technicalDatasheet.displayFileName }}

Download PDF

Contact Us